8 Port POE (Power Over Ethernet) Switch with 3 Uplink Port Specially Designed For Use with Security Camera Systems
The 8 port 10/100Mbps PoE switch provides a easier installation way for your
PoE devices (IP cameras,VoIP,wireless AP,etc.).And it can detect your PoE
devices according to PoE standard. So the users do not need to worry about the
PoE switch will damage their PoE devices. The max transmission distance is 100
meters with Cat5 cables. Ideally, shorter cable would reduce the power
degradation over the cables; with high quality cables also can reduce power
loss. Plug & play design make the installation quite easy, users do not need any
configuration, which make this PoE switch a very good choice for IP cameras,
wireless AP, VoIP users.
- 8FE POE+3 Gigabit Uplink Port
- Comply to IEEE 802.3, IEEE 802.3u, IEEE 802.3ab.
- Comply to POE IEEE 802.3af/at standard, all ports standard testing.
- Support POE IPC camera, POE WIFI AP, and POE IPPHONE.
- Fluid Control: Full-duplex: IEEE 802.3x, Half-duplex: back pressure.
- Auto MDI/MDIX.
- Upstream port lightning protection.
- MAX 30W, MAX power 150W.
- All ports support wire speed switch, jumbo frame transmission.
- Zero QFD, self-adaption.
- Panel lights can monitor operative mode and malfunction analysis.
IEEE 802.3 10 BaseT
IEEE 802.3u 100 BaseTX
IEEE 802.3ab 1000 BaseT
IEEE 802.3x Flow Control
|Number of Ports
||8 PoE Port +3 Gigabit ports uplink
||Store and Forward
||10 BaseT CAT 3,4,5 UTP/STP
100M BaseTx CAT 5 UTP/STP
1000M BaseTx CAT 5,6 UTP/STP
|LED Indicators Per Port
||Link/Act, PoE Act/Status
|LED Indicators Per Unit
||100~240V/AC, 50~60 Hz
||15-30W per port, 130W Max
||32ºF ~ 140ºF (0ºC ~ 60ºC)
||-4ºF ~ 194ºF (-20ºC ~ 90ºC)
||10 ~ 90% (Non-Condensing)
Note: Product design and specifications are subject to
change without notice.
This product was added to our catalog on Wednesday 24 September, 2014.