16ch active video receiver spring joins terminal- BNC
Female to 4x RJ45 Female Rack Mount Style
Main Features :
- Full motion CCTV video at long distance(Max. 3000ft).
- Built-in Linearity, sharpness and chroma control
- Enable unparalleled common interferences rejection
- The Device is Capable of Receiving and Transmitting Video Signals Over
UTP Wire .
- Can Be Used With DVR/Quad, Easy to Transfer Camera Video and PTZ Control
Signal over Long Distance.
- Enables Cost-Effective, Point to Point Transmission Application.
- Adopts Twisted Pair Wiring, Which is Low Cost and Easily Obtainable.
- With Noise Interference Restrain Design and Permitting Stable Image.
- Built-In Transient Protection Design, Needless to Use a Ground
- Each Channel has two video out (BNC)
User Manual Download
|Rejection:15HKz-6HKz 60dB typ.
||Coax, male BNC:75ΩUTP(Screwless)Terminal Block or UTP
RJ45 Data Connector:100Ω
||One Unshielded Twisted Pair 24-16AWG(0.5-1.31mm) Per
video signal: DC Loop Resistance 52 ohms per 1,000 ft(18 ohms per 100m)
||6000V 1.2μS x 50μS
||BNC coax: 75Ω UTP/Connector: 100Ω or RJ-45 100Ω
||Brightness and Sharpness
||4 UTP Port
*** All Specifications are subject
to change without notice.
***Type of the required wire: Unshielded Cat-5 or above twisted pair wire
(Please use standard Cat-5 or above twisted pair wire. The wire quality will
directly affect the transmitted image effect and transmission distance.)***
This product was added to our catalog on Wednesday 12 January, 2011.