4PCS High Performance Video Ground Loop Isolator Filter – BNC
Video Ground Loop Isolator could reduce "Ground Loop Interference" with CCTV
signals and can easily install in a new or added to existing systems. It is
useful where a video signal is transmitted via cable between points with
different ground potentials, differences in ground potentials are typically
caused by unbalanced power line loads.
Troubleshooting: Electromagnetic Interference = EMI
Ground loop interference is caused by EMI. When there is
large difference in ground potentials between two points EMI
may occur. Differences in ground potentials are typically caused by unbalanced
power line loads, and the peak-to-peak magnitude may vary from 0 volts to more
than 10 volts.
Using Ground Loop Isolators may help prevent EMI. Ground
Loop Isolators reduce the interference between the camera and the DVR by
producing equal and opposite magnetic field that cancels one another. It is
often recommended to use the Ground Loop Isolator at
the DVR end. Also our Ground Loop Isolators has
built-in Wave / Interference Rejection and Noise Filter.
Note: If that does not solve your ground loop interference it is suggested
that you change your power supply. Or if the camera is dual power, change to 24V
AC.
Features:
- BNC male to BNC female with mini cable 15 on both sides
- Passive, no power required
- Prevents video-signal distortion caused by video ground loops
- Eliminates picture tearing , cross talk and rolling
- Built in video BALUN, perfect to work with DVR to immunity DVR
interference , for extra interference rejection
- Built in TVS (Transient Voltage Suppressors) for surge protection
- Insertion loss: 0.5dB
- Frequency response: 0-3dB at 10Mhz
- Input / output resistance: 75ohm
- Isolation voltage: DC 600V
- Insulation resistance: 100m ohm
- Transient voltage suppressors: 12Vrms
Package Contents:
- 4pcs BNC Ground Loop Isolator Video Surveillance
This product was added to our catalog on Monday 21 March, 2011.